| Description |
1 online resource (viii, 170 pages) : illustrations (some color) |
| Series |
Conference proceedings of the Society for Experimental Mechanics Series, 2191-5644 |
|
Conference proceedings of the Society for Experimental Mechanics series, 2191-5644
|
| Contents |
Preface; Contents; Chapter 1: Effect of Specimen Holder on Static and Fatigue Tests on Titanium/Cement Interfaces; 1.1 Background; 1.2 Material and Method; 1.2.1 Static Test Experiment; 1.2.2 Finite Element Analysis; 1.3 Results and Discussion; 1.4 Conclusions; References; Chapter 2: Mechanical Behavior and Aluminization of Cu21Zn6Al Alloys; 2.1 Introduction; 2.2 Experimental Methods; 2.3 Results and Discussion; 2.4 Conclusion; References; Chapter 3: Numerical Analysis of Stress/Strain Fluctuations in Coiled Tubing During Deepwater Deployment; 3.1 Introduction; 3.2 Finite Element Analysis |
|
3.3 Input Data3.4 Results and Discussion; 3.5 Conclusions; References; Chapter 4: Determining SIFs Using DIC Considering Crack Closure and Blunting; 4.1 Introduction; 4.2 Calculating SIFs Using COD Measurements; 4.3 Calculating SIFs Using the Over-Deterministic Least-Squares Method; 4.4 Calculating SIFs Using the J-Integral Formulation; 4.5 Experimental Procedure; 4.6 Results; 4.7 Conclusions; References; Chapter 5: Characterization of Sub-surface Damage During the Early Stage of Stress Corrosion Cracking by Nano Indentation; 5.1 Introduction |
|
5.2 Electrochemical Experiment and Sample Preparation5.3 Surface Morphology Characterization; 5.4 Characterization of Corrosion Product Layer; 5.5 Near-Surface Damage Evolution; 5.6 Grain Boundary Damage Evolution; 5.7 Concluding Remarks; References; Chapter 6: In-Situ Tensile Test on 316H Sent Using Digital Image Correlation; 6.1 Introduction; 6.2 Microsample Preparation; 6.3 Experimental Set-Up; 6.4 Kinematic Measurements Using Digital Image Correlation; 6.5 Projection Onto Linear Elastic Fracture Mechanic Basis; 6.6 Simulation Using A Crystal Plasticity Model |
|
6.7 Assessment of the Identification Procedure: The Experimental Test6.8 Conclusions; References; Chapter 7: Compression Testing of Silica Microspheres with Synchronized SEM Video; 7.1 Introduction; 7.2 Experimental Method; 7.3 Results and Discussion; 7.4 Conclusions; References; Chapter 8: Development of Glass/Steel Bibeam Specimen for Study of Brittle Crack Path Stability ; 8.1 Introduction; 8.2 Specimen Preparation; 8.3 Strain Gage Calibration; 8.4 Adhesive Selection; 8.5 Validation of Bibeam with Epon Epoxy; 8.6 Fracture Testing Procedure; 8.7 Fracture Testing Results |
|
8.8 Comparison with Numerical Crack Propagation Calculations8.9 Conclusions; References; Chapter 9: Construction Procedure of Spot Weld Failure Model for Crash Simulation; 9.1 Introduction; 9.2 Developed Spot Weld Failure Model; 9.3 Experimental Procedure for Newly Proposed Spot Weld Failure Model; 9.4 Hybrid Method to Determine the Coefficients of Newly Proposed Failure Model; 9.5 Construction of Newly Proposed Failure Model; 9.6 Verification of the Proposed Failure Model; 9.7 Conclusion; References; Chapter 10: Constitutive Model Calibration via Autonomous Multiaxial Experimentation |
| Summary |
Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including: Hybrid Experimental & Computational Techniques Advanced Experimental Mechanics Methods Integration of Models & Experiments Soft Materials Education & Research in Progress Applications |
| Notes |
International conference proceedings |
|
Online resource; title from PDF title page (SpringerLink, viewed September 23, 2016) |
| Subject |
Mechanics, Applied -- Congresses
|
|
Mechanics, Applied
|
| Genre/Form |
proceedings (reports)
|
|
Conference papers and proceedings
|
|
Conference papers and proceedings.
|
|
Actes de congrès.
|
| Form |
Electronic book
|
| Author |
Zhu, Yong (Materials scientist), editor
|
|
Zehnder, Alan T., editor.
|
| ISBN |
9783319420288 |
|
3319420283 |
|
