| Description |
1 online resource (x, 337 pages) |
| Series |
Advanced structured materials, 1869-8433 ; volume 102 |
|
Advanced structured materials ; 102. 1869-8433
|
| Contents |
Intro; Preface; Contents; 1 Three Dimensional Simulation of Filling Process for Stacked-Chip Scale Packages; Abstract; 1 Introduction; 2 Numerical Model; 3 Simulation Setup; 4 Results and Discussion; 5 Conclusion; References; Conference Proceeding; Book Chapter; 2 Analysis of Temperature Distribution Behavior of Motorcycle Brake Pads; Abstract; 1 Introduction; 1.1 Problem Statement; 1.2 Objective; 1.3 Scope and Limitation; 2 Literature Review; 3 Methodology/Experimental Set-Up/Model Set-Up; 3.1 Modeling Software; 3.2 Solidworks (Part Modeling); 3.3 Material Properties; 3.4 Thermal Analysis |
|
3.5 Mesh Generations3.6 Condition; 4 Results and Discussion; 5 Discussion; 6 Conclusion; Acknowledgements; References; 3 Application of a Portable Coordinate Measuring Machine onto Automotive Door Panel for Quality Inspection Activity; Abstract; 1 Introduction; 2 Problem Statement; 3 Frequent Inspection; 3.1 Coordinate Measuring Machine; 3.2 The Portable CMM; 4 Methodology; 5 Results and Discussion; 5.1 Inspection Time; 5.2 Data Reliability; 5.3 Cost Saving and Other Benefits; 6 Conclusion; References |
|
4 Study on Implementation of Neural Network Controlling Four Quadrants Direct Current ChopperAbstract; 1 Introduction and Review; 1.1 Four Quadrants Drive DC Chopper and Chopper Operation Controller; 1.2 Chopper Operation Controller; 1.3 Neural Network as Chopper Operation Controller; 2 Methodology; 2.1 Proposed Control Strategy; 2.2 Neural Network Data Training Preparation Process; 2.2.1 Neural Network Data Preparation; 2.2.2 Accelerator and Brakes Signals; 2.2.3 Predetermined Chopper Operation; 2.2.4 Matlab/Simulink Simulation Model; 2.2.5 Gathering Data for NN Training |
|
2.2.6 Target Output Signals for ANN Training2.3 Neural Network Training; 2.3.1 NN Training Results; 2.4 Testing the ANN; 3 Neural Network Controller Final Testing and Results; 3.1 Development of Complete Simulation Model; 3.2 Performance Index (PI); 3.3 Results; 4 Conclusion; References; 5 Processor in the Loop for Testing Series Motor Four Quadrants Drive Direct Current Chopper for Series Motor Driven Electric Car; Abstract; 1 Introduction and Review; 1.1 Proposed Four Quadrant DC Drive Chopper Design; 2 Simulation Model Established from Mathematics Equation; 2.1 Methodology |
|
2.1.1 Processor in the Loop (PIL)2.1.2 Chopper Operation Controller; 2.1.3 Subsequent and Delay Controller (SAD); 2.1.4 IGBT Firing Controller (IFC); 2.1.5 Signal Conversion; 2.1.6 Signal Serial Transmission and Baud Rate; 2.1.7 Data String Protocol; 2.1.8 Hardware in the Loop Processing Time; 2.1.9 Processor in the Loop Test Experiment; 2.1.10 Accelerator and Brakes Signals; 3 Result; 4 Conclusion; References; 6 Comparative Study of Fuel Consumption, Acceleration and Emission for Road Vehicle Using LPG or Gasoline; Abstract; 1 Introduction; 1.1 Physical Properties and Characteristics for LPG |
| Summary |
This volume contains many state-of-the-art applications for the development of new materials and technologies. It discusses computer-based engineering tools which are widely used and related to the simulation, evaluation of data and design processes. For example, modern joining technologies can be used to fabricate new compound or composite materials, even composed of dissimilar materials. Such materials are many times exposed to harsh environments and must reveal specific properties. Technologies in this context are mainly related to the transportation technologies in their wider sense. This means automotive and marine technology, i.e., ships, amphibious vehicles, docks, offshore structures, and even robots. Typically, finite element and finite volume methods are used in the context of engineering simulations and this volume highlights their importance |
| Notes |
Online resource; title from PDF title page (SpringerLink, viewed January 25, 2019) |
| Subject |
Engineering.
|
|
Materials.
|
|
Engineering
|
|
engineering.
|
|
Engineering
|
|
Materials
|
| Form |
Electronic book
|
| Author |
Azman Ismail, 1978- editor.
|
|
Abu Bakar, Muhamad Husaini, editor
|
|
Öchsner, Andreas, editor.
|
| ISBN |
9783030056216 |
|
303005621X |
|
9783030056223 |
|
3030056228 |
|
