| Description |
1 online resource (1209 pages) |
| Series |
RILEM Bookseries ; v. 28 |
|
RILEM bookseries ; v. 28.
|
| Contents |
Intro -- Preface -- Organization -- Conference Committees -- Conference Chair -- Conference Vice Chair -- International Scientific Committee -- Local Organizing Committee -- Contents -- RILEM Publications -- RILEM Proceedings (PRO) -- RILEM Reports (REP) -- Mixture Design, Admixtures and Alternative Binder -- An Fe-Rich Slag-Based Mortar for 3D Printing -- Abstract -- 1 Introduction -- 2 Methodology -- 3 Results and Discussion -- 4 Conclusion -- Acknowledgements -- References -- Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating Admixture on Surface -- Abstract |
|
1 Introduction -- 2 Significance of Research -- 3 Materials and Methods -- 3.1 Assessment of Accelerator Spraying on Buildability of a Printed Structure -- 3.2 Assessment of Effect of Accelerator Spraying in Large Scale Printed Structures -- 3.3 Tests Performed in Lab to Assess the Accelerating Admixture -- 4 Results and Discussions -- 5 Conclusion -- References -- Effect of Wollastonite Micro-Fiber Addition on Properties of 3D-Printable 'Just-Add-Water' Geopolymers -- Abstract -- 1 Introduction -- 2 Experimental Procedures -- 2.1 Materials and Mixture Proportion |
|
2.2 Mixing, Printing and Curing -- 2.3 Testing -- 3 Results and Discussion -- 3.1 Shape-Retention-Ability -- 3.2 Evolution of Static Yield Stress -- 3.3 Compressive Strength -- 3.4 Flexural Strength -- 4 Conclusions -- Acknowledgements -- References -- Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing -- Abstract -- 1 Introduction -- 2 Experimental Program -- 2.1 Materials -- 2.2 Material Processing -- 2.3 Rheology -- 2.4 Stability -- 2.5 3D-Printing -- 3 Results -- 3.1 Rheological Properties -- 3.2 Stability -- 4 Printing Performance -- 5 Conclusion -- Acknowledgements |
|
1.5 Ultrasonic Wave Transmission Velocity -- 2 Results and Discussion -- 2.1 Flow Test -- 2.2 Comparison of 3D Printed and Molded Prisms -- 2.3 Comparison Between Materials -- 2.4 Ultrasonic Wave Transmission Velocity -- 3 Conclusions -- Acknowledgements -- References -- Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication -- Abstract -- 1 Introduction -- 2 Materials and Methods -- 2.1 Material Selection -- 2.2 Experimental Protocol -- 2.2.1 Evaluation of Workability with Time -- 2.2.2 Green Strength Test -- 2.2.3 Initial and Final Setting of Mixes |
| Summary |
This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization |
| Bibliography |
References-Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters-Abstract-1 Introduction-2 Materials and Methods-2.1 Material-2.2 Methods-3 Results and Discussion-3.1 Effect of Accelerator Dosage-3.2 Effect of Process Parameters-4 Summary and Outlook-Funding-References-Comparison of Printable Inorganic Binders-Key Properties for 3D Printable Materials-Abstract-1 Materials and Methods-1.1 Binders and Mortar Design-1.2 Printed Prisms-1.3 Molded Prisms-1.4 Flow of Mortars |
| Notes |
2.2.4 Compressive Strength |
|
Print version record |
| Subject |
Concrete -- Congresses
|
|
Materials -- Technological innovations -- Congresses
|
|
Building construction & materials.
|
|
Production engineering.
|
|
Materials science.
|
|
Technology & Engineering -- Civil -- General.
|
|
Technology & Engineering -- Manufacturing.
|
|
Technology & Engineering -- Material Science.
|
|
Concrete
|
|
Materials -- Technological innovations
|
| Genre/Form |
Electronic books
|
|
proceedings (reports)
|
|
Conference papers and proceedings
|
|
Conference papers and proceedings.
|
|
Actes de congrès.
|
| Form |
Electronic book
|
| Author |
Bos, Freek.
|
|
Lucas, Sandra S
|
|
Wolfs, Rob J. M
|
|
Salet, Theo A. M
|
| ISBN |
9783030499167 |
|
3030499162 |
|
