| Description |
1 online resource (xxiii, 1045 pages) : illustrations (chiefly color) |
| Series |
Lecture notes in electrical engineering ; volume 912 |
|
Lecture notes in electrical engineering ; v. 912.
|
| Contents |
Aerodynamics and Design -- Asia-Pacific Region's Aircraft Design and Development Strategy for Single-Aisle Aircraft in the Oligopoly Market of Boeing and Airbus -- Study on Wind Resistance Characteristics of Multi-rotor UAV -- Inverse Design Method of Transonic Airfoil Based on Deep Neural Network -- High-Rise Building Wind Field Simulation -- Study on Aerodynamic Characteristics of "Propeller/Wing" System with Overset Mesh Method -- An Ontology Based Single Source of Truth (SSOT) Construction Approach for Aircraft Modeling and Simulation -- Experimental Investigations on Aerodynamic and Psychoacoustic Characteristics of Loop-Type Propeller -- Effect of Dynamic Micro Vortex Generator on Corner Shock Wave Boundary Layer Interactions Based on DES -- Aerodynamic Characteristics of A Compound Deflected LEF/TEF Rotor -- Analysis of Aerodynamic Characteristics and Influence of Parameters of the Quad Tiltrotor Aircraft -- A Two-Step Optimization Method Using POD-Based Geometric Parameterization for Aerodynamic Shape Optimization -- Anti-icing Performance of Engine Inlet Cone by Hot Air Film -- Aerodynamic Characteristics of Close UAV Formation -- Conceptual Design and System Level Analysis of Tilt-Duct eVTOL Aircraft -- Research on Wind Tunnel Test of the Total Pressure Probe Layout for Civil Aircraft -- Study on the Dynamic Aerodynamic Performance of Airfoil with Direct Force Measurement -- The Research of Correlationship and Critical Ice Shape Acquisition in CIRA-IWT Icing Wind Tunnel -- Parametric Studies of the Fuselage Geometry of a Double-Bubble Aircraft Configuration -- Wind Tunnel Free Flight Model Attitude Determination Based on Non-contact IR Optical Measurement -- Design and Performance Analysis of a Fuel Cell Powered Heavy-Lift Multirotor Drone -- Multi-objective System Optimization of Suborbital Spaceplane by Multi-fidelity Aerodynamic Analysis -- Experimental Validation of Nonlinear Coupled Constitutive Relations in Continuum Flows -- A Propeller Evaluation and Selection Tool for Multicopter and VTOL Design -- Design and Development Status of Experimental Winged Rocket WIRES#015 -- Multiobjective Optimization of a Highly Maneuverable Supersonic Airfoil Using Multifidelity EGO -- A Computational Study on Unsteady Aerodynamic Forces Around a Pitching Airfoil with Shock and Shock-Induced Separation -- A Multi-fidelity Method-Based Aerodynamic Design Strategy for Preliminary Prop-Rotors -- Aerodynamics Characteristics and Flight Dynamics Analysis of Multi-body Aircraft -- Hydrophilic Coatings for Natural Laminar Flow -- Modeling of Crossflow-Induced Boundary Layer Transition -- On the Characteristics of Anti-contamination Devices on Attachment-Line of Subsonic Transport Aircraft -- Preliminary Investigation on Flyover Noise of Propeller-Powered Aircraft Using a Phased Microphone Array -- Natural Laminar Flow Design for Highly Swept Wings -- Research on Aerodynamic Characteristics of General Long Endurance Vertical Take-Off and Landing Fixed Wing UAV -- Flux Limiting Schemes for Fine Resolution Detonation Wave Cell Structure -- Experimental Investigation of Performance for Korean Electric Unmanned Helicopter on Ground -- Aerothermodynamic Shape Optimization of a Hypersonic Lifting Body -- Experimental Studies on Behavior of Laminar Separation Bubble Formed on the Hofsass Espada Airfoil Near Stall -- Influence of Turbulence Intensity on Flow Field Around NACA0012 Wing at Reynolds Number of 20,000 -- Analysis of Rotor Noise During Ramp Collective Pitch Increase by CFD Method -- Analyses on Aerodynamic Interactions of Quad-Tiltrotor Aircraft with Variable RPM and Diameter -- Separation Characteristics of a Two-Stage-To-Orbit Winged Rocket by Aerodynamic Interaction Analysis -- Aerodynamic Performance of a Low-Speed Blended-Wing-Body Aircraft with Distributed Ducted Fans -- Numerical Study of the Aerodynamic Performance of Two Coaxial Flapping Rotary Wings Under Wake Interaction -- Twin Support Vector Regression and Its Application on Aerodynamic Design -- H-Force of Rigid Rotor in Forward Flight of Multi-rotor -- Numerical Investigation of Transonic Flutter Characteristics of a Supercritical Airfoil -- Control of Wing-Engine-Slat Cut Out Flow Separation Using Nacelle Nozzle Modification -- Developments of Free-Flight Testing Facility for Aerodynamic Assessment of Martian Entry Capsule -- Multi-fidelity Modeling via Regression-Based Hierarchical Kriging -- Evaluation of the Use Cases of eVTOLs with High Potential in the Philippines and Thailand -- Numerical Investigation of Droplet Impact on the Surface by Multiphase Lattice Boltzmann Flux Solver -- Computation of Hypersonic Transitional Flows Over Cones Using Gas-Kinetic Scheme Coupled with the Turbulence Model -- Effect of Solidity on Efficiency for High-Advance-Ratio Propeller -- Aerodynamic Study of Cone-Derived Waverider as Supersonic Transport -- Boundary-Layer Transition Control by Plasma Crossflow Reduction in Swept Wing -- Numerical Investigations of Ground Effect of a Quadcopter -- A Review of Recognition in Military Airworthiness Regulatory Frameworks |
|
Structures and Materials -- Material Property Measurement of 3D Printed Carbon Fiber Composite Using a Digital Image Correlation Method -- Research on Helicopter with Emergency Floating System Impact Load Characteristics During Ditching Based on ALE Method -- Study on shapes of Double Cylindrical Structure for Wing Twist Morphing -- Multi-objective Optimization for Resilient Operation of Adaptive Morphing Flap Divided into Span Directions -- On the Evaluation and Design Methods of Structural Recoverability -- Simulation and Analysis of Automatic Passenger Door Actuation System -- Research on the Aerodynamic Failure Load for Civil Aircraft -- The Vibration Transfer Path Analysis Based on One Large Passenger Aircraft -- Manufacturability and Deformation Performances of CFRP Twist Morphing Wing Structure with Applying the Electrodeposition Resin Molding Method -- Doubly Coupled Antagonistic Shape Memory Alloy Actuator for Morphing Wing -- Dynamical Analysis of Rotor Loads in Helicopter Circling Flight Condition -- Study on Laser Shock Peening Technology for Hole Position of Aviation Parts -- Calculation Method and Experimental Verification of Optical Fiber Limit Value of Aeroengine Rotor Blade -- Analysis of Laser Positioning Milling Process for Aircraft Cabin Door Opening -- Numerical Simulation of TC17 Titanium Alloy Thin Blade Strengthened by Laser Shock Processing -- Aerodynamic Study for Wing Shapes Based on a Stuffed Bird -- Investigation of Temperature Generalization for PCM-Based Cooling Plate Used for Remotely Located Electronics -- Structural Design and Analysis of Large-Load Fire-Fighting Multi-rotor UAV -- Research on Bearing Fault Recognition Based on PSO-MCKD and 1D-CNN -- Low-Speed Wind Tunnel Testing of a Passive Camber Morphing Airfoil Using a 3D-Printed Compliant Mechanism -- Surrogate Model-Based Parametric Structural Design of a Composite Tiltrotor Blade |
| Summary |
This proceeding comprises peer-reviewed papers of the 2021 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2021), held from 15-17 November 2021 in Jeju, South Korea. This book deals with various themes on computational fluid dynamics, wind tunnel testing, flow visualization, UAV design, flight simulation, satellite attitude control, aeroelasticity and control, combustion analysis, fuel injection, cooling systems, spacecraft propulsion and so forth. So, this book can be very helpful not only for the researchers of universities and academic institutes, but also for the industry engineers who are interested in the current and future advanced topics in aerospace technology |
| Bibliography |
Includes bibliographical references and index |
| Notes |
International conference proceedings |
|
Online resource; title from PDF title page (SpringerLink, viewed September 12, 2022) |
| Subject |
Aeronautics -- Congresses
|
|
Astronautics -- Congresses
|
|
Aerodynamics -- Congresses
|
|
Aerodynamics
|
|
Aeronautics
|
|
Astronautics
|
| Genre/Form |
proceedings (reports)
|
|
Conference papers and proceedings
|
|
Conference papers and proceedings.
|
|
Actes de congrès.
|
| Form |
Electronic book
|
| Author |
Lee, Sangchul, editor
|
|
Han, Cheolheui, editor
|
|
Choi, Jeong-Yeol, editor
|
|
Kim, Seungkeun, editor
|
|
Kim, Jeong Ho, editor
|
| ISBN |
9789811926891 |
|
9811926891 |
|
